Switch2 Control

This catalog has no sub-catalogs.

Switch2 - 2 Channel, Radio Remote SCU, Standard Plug

Switch2 - 2 Channel, Radio Remote SCU, Standard Plug

Single Channel S2 Manual SCU, RCD Plug 1205-003

£272.00 Exc. VAT

£326.40 Including VAT

You can qualify as an individual with disability or as a Registered Charity. Please remember to fill in the VAT Exemption section of the form at 'Checkout'

The radio remote unit works in exactly the same way as the manual one but can also be controlled by plugging any switch into our universal transmitter (1205-063)  

This means that you can activate any equipment without any cable connection, up to 20 metres away.  Because it is radio controlled, you do not have to point it or keep it in a visual line with the controller.  

You can use any number of control points with any number of  transmitters at once and they will not get confused.  

The 2 Channel unit allows you to control two pieces of equipment at any one time from on 13amp power supply.  

You can set the mode and times separately, each in a different mode or all at the same setting in one easy step.

Once set, the control panel can be 'locked' so the setting cannot be changed.

You can also use the radio remote units manually.

Note:   The Switch and Transmitter are not included and must be bought separately.

Other useful stuff:

Low Profile Switches - In 9 Colours

Low Profile Switches - In 9 Colours

£44.00

Low profile switches - Available in 9 colours.